As one of the most popular stone-crushing equipments in the world, Jaw Crusher is ideally suitable for primary and secondary crushing. The highes tanti-pressure strength of crushed material is 320Mpa.

    Our design and production features the absolute advantages in this field. With large crushing ratio, even granularity, simple structure, reliable operation, convenient maintenance, low cost. It is widely used in mining, metallurgy, construction, highway, railroad, and chemistry industries and etc.

    The Crushing form of this series Jaw Crusher is driven-squeezing style. Its working principle is: Motor drives belt and belt pulley, makes moving jaw up and down through eccentric shaft. When the moving jaw is up, the angle between lining plate and moving jaw becomes large, and this will push moving jaw plate close to the fixed jaw plate. During this process, the material is crushed and ground, thus the crushing will be done. When the moving jaw is down, the angle between lining plate and moving jaw becomes small, the moving jaw plate will leave the fixed jaw plate on account of the effect of pulling bar and spring, and then the crushed material will be discharged from the lower opening of the crushing room. With the motor continuously rotating and the material periodically crushed and discharged by the crusher, the mass production can be realized.

Contact us:

TEL : 86-371-67770550

Fax:86-371-67431834

Address: No.43,Tongbai Road, Zhengzhou, Henan, China

Source from:http://www.vipeakgroup.com/