Industrial Ethernet Switch

Industrial redundant Ethernet Switch with 6 10/100BaseT(X)ports and 2 optic ports that provide an economical solution for your industrial Ethernet connections. The built-in relay warning function alerts network engineers when power failures or port breaks occur and the switches are designed for harsh industrial environments, such as in hazardous locations (Class 1 Div.2/Zone 2). standard operating temperature range of -10 to 75C. This undergo a 100% burn-in test to ensure that they fulfill the special needs of industrial automation control. This series switches can be installed easily on a DIN-Rail or in a distribution box. FEATURES : 1) IEC61850 compliant 2) IEEE802.3/802.3x/802.3u/802.3Q 3) Particular SW-Ring patent ring technique. Turbo Ring (recovery time < 20 ms at full load) 4) 10/100Base-T(X) (RJ45), 100Base-FX (multi mode, single mode) 5) F/H duplex mode or force work mode 6) Plug and play, MDI/MDI-X auto connection 7) Store and forward, support MAC address filtrate 8) Broadcast storm protection. Relay output alarm 9) Redundant 24VDC power input (12V~36VDC) 10) Operating temperature ranges from -10 to 75? 11) Industry standard design IP30 protection, rugged high-strength metal case. ****Our Brief Product list**** 1)Industrial Ethernet Swicthes ( IEC 61850 compliant ) 2)Industrial Media Converter 3)Serial Device Servers( Serial to Ethernet ) 4) Embedded Serial Server Module 5) Serial to Fibre Converters 6) Ethernet to Fibre Converters 7) RS232/RS485/RS422 Converters 8)RS485/RS422 HUB 9)USB to RS232/RS485/RS422 10)E1/Enthernet/V.35 Converters 11)E1/FE1 to Serial Converters 12)E1/V.35 to Fibre Converters 13)Fibre Optic Multiplexer. Interfaces :Ethernet, Serial (RS232, RS485), NXE1, V.35, FXO/FXS, 14) Video to fiber + Options : Audio, Data, Ethernet, Telephone(FXO/FXS), I/O. 15) Fiber cable, Connectors, Adapters, Pigtails, Patch cords, LIUs, Joint enclosures, etc 16) Surge Protector for Video 17) RJ45/BNC Ethernet Surge protector 18) RS232 Isolation protector & RS-485/422 Surge Protector For more details please contact us.

Profibus to Fibre Converter with Dual Fi

The Model 2145 Bit-Driver used in a PROFIBUS-DP application is a two optic port repeater with single TIA/EIA-485-A electrical port. The 2145 operates at rate 9600 baud to 12 Mbaud in linear bus topology. The 2145 can be used as an optical repeater between the fiber optic segments, an optical to electrical converter between an fiber optic segment and electrical station(s), or T-connector/repeater between two fiber optic segments and electrical station(s). The 2145 is transparent and does not evaluate the PROFIBUS data exchange. Using fiber optics over the physical layer, the 2145 provides longer segment distances, electromagnetic noise immunity and ground potential difference independence in the linear bus topology. The 2145 optics can be optionally equipped with different characteristics. The 2145 retimes the received optical signal and can link up to 32 fiber optic segments in series. The electrical port supports up to 31 stations. The 2145 Termination switch can select an internal cable type-A termination. External terminations can derive power from the sub-D connector between pins 6 and 5. The 2145 unit attaches to EN50022 (35mm DIN) mounting rail. Power is applied through screw terminals and data rate selection made through internal DIP switches. ****Features**** 1) Meets PROFIBUS-DP specification. Tested & approved by PROFIBUS Lab 2) Multimode and single mode, Plastic or Glass Fiber 3) 2 port optical repeater, optical T-connector, optical to electrical converter [1 Port Optional] 4) 9600 bps to 12 Mbps - switch selectable 5) DIN rail mounting 6) Modbus-RS485, Status indicators: Power, TxD, RxD, Invalid switch setting ****Our Brief Product list**** 1)Industrial Ethernet Swicthes ( IEC 61850 compliant ) 2)Industrial Media Converter 3)Serial Device Servers( Serial to Ethernet ) 4) Embedded Serial Server Module 5) Serial to Fibre Converters 6) Ethernet to Fibre Converters 7) RS232/RS485/RS422 Converters 8)RS485/RS422 HUB 9)USB to RS232/RS485/RS422 10)E1/Enthernet/V.35 Converters 11)E1/FE1 to Serial Converters 12)E1/V.35 to Fibre Converters 13)Fibre Optic Multiplexer. Interfaces :Ethernet, Serial (RS232, RS485), NXE1, V.35, FXO/FXS, 14) Video to fiber + Options : Audio, Data, Ethernet, Telephone(FXO/FXS), I/O. 15) Fiber cable, Connectors, Adapters, Pigtails, Patch cords, LIUs, Joint enclosures, etc 16) Surge Protector for Video 17) RJ45/BNC Ethernet Surge protector 18) RS232 Isolation protector & RS-485/422 Surge Protector For more details please contact us.